More info

Features
• There are 2 methods of fitting the front Haul Loop. Both use 2 x H-Duty cable ties.
• Undo web on the stainless buckles. Wrap the web around the fork leg, directly under the lower triple-clamp.

• Re-thread the stainless buckles(making sure to feed the web back through the buckle to ‘lock’ it off).

• The loose end can be placed under the elastic-loop provided.
• To prevent the Haul Loop moving down the fork leg/s you need to use a cable tie in either 2 ways.
• The first method is to feed the cable tie through the small web-loop next to the stainless buckle.

• Connect the cable tie and tighten around the fork leg directly above the lower triple-clamp (this method is illustrated on the ‘Haul Loop’ page)
• Another method is to use 2 x cable ties linked together in a figure of eight behind the front light/number plastic (this method is shown on this page).

• The figure of eight method is a superior one, as you can fine tune the angle of the Haul Loop by decreasing the length/s of the cable ties.
• The shorter the tie the more elevated the Haul Loop will sit (see Works Series video).

Tech Specs
• Semi-rigid design
• Universal fit (front only)
• Ultra-tough construction
• HYPALON: abrasion resistant re-enforcement
• TOUGHTEK – grips wet or dry
• Alloy buckles

Weight
• 70g